Quantcast

Back-up Schedules not being carried over to console

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Back-up Schedules not being carried over to console

Mark Gregory
I am using Linux Cinnamon Mint 18.1, and recently installed / set up Bacula version 7.0.5 using Synaptic.  I have it configured, and have backed up three Client computers in my local network without issues.

I made a new schedule called "DaytimeWkDay" to back up three other computers in my possession at shortly after noon (12:35 PM) that are not running 24 hours a day.  I added the schedules to the subject Client machines in bacula-dir.conf, but the "Status, Scheduled" in console still shows "WeeklyCycle" for these machines.

How do I get the console to run these machines on the DaytimeWkDay schedule?

Below are some relevant settings from bacula-dir.conf:

Client Definitions for subject Client machines:
Client {
  Name = mark-LD800-fd
  Address = 192.168.1.26
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = kristi-Gw-fd
  Address = 192.168.1.101
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = mark-Inspiron-3537-fd
  Address = 192.168.1.25
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}


Schedule Definition:
Schedule {
  Name = "DaytimeWkDay"
  Run = Level=Full Pool=DtFull 1st mon at 12:35
  Run = Level=Differential Pool=DtDiff 2nd-5th mon at 12:35
  Run = Level=Incremental Pool=DtDaily mon-fri at 12:35
}


Job Definitions for the subject Client machines:
JobDefs {
  Name = "mark-LD800"
  Type = Backup
  Level = Incremental
  Client = mark-LD800-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "kristi-Gw-fd"
  Type = Backup
  Level = Incremental
  Client = krists-Gw-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "mark-Inspiron-3537-fd"
  Type = Backup
  Level = Incremental
  Client = mark-Inspiron-3537-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}


Console "Status" / "Scheduled" data for subject Client machines AFTER the above settings were saved and Director restarted:
Differential   Backup    10  Sun 16-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-LD800         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-OP745         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   kristi-Gw          WeeklyCycle

Thank you for your help.

Mark Gregory

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Back-up Schedules not being carried over to console

Ana Emília M. Arruda
Hello Mark,

You need to "reload" the new configurations you wrote to the file in bconsole.

Please run the "reload" command in bconsole, then a "status dir" must show your new jobs schedule.

Best regards,
Ana

On Fri, Apr 14, 2017 at 12:18 PM, Mark Gregory <[hidden email]> wrote:
I am using Linux Cinnamon Mint 18.1, and recently installed / set up Bacula version 7.0.5 using Synaptic.  I have it configured, and have backed up three Client computers in my local network without issues.

I made a new schedule called "DaytimeWkDay" to back up three other computers in my possession at shortly after noon (12:35 PM) that are not running 24 hours a day.  I added the schedules to the subject Client machines in bacula-dir.conf, but the "Status, Scheduled" in console still shows "WeeklyCycle" for these machines.

How do I get the console to run these machines on the DaytimeWkDay schedule?

Below are some relevant settings from bacula-dir.conf:

Client Definitions for subject Client machines:
Client {
  Name = mark-LD800-fd
  Address = 192.168.1.26
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = kristi-Gw-fd
  Address = 192.168.1.101
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = mark-Inspiron-3537-fd
  Address = 192.168.1.25
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}


Schedule Definition:
Schedule {
  Name = "DaytimeWkDay"
  Run = Level=Full Pool=DtFull 1st mon at 12:35
  Run = Level=Differential Pool=DtDiff 2nd-5th mon at 12:35
  Run = Level=Incremental Pool=DtDaily mon-fri at 12:35
}


Job Definitions for the subject Client machines:
JobDefs {
  Name = "mark-LD800"
  Type = Backup
  Level = Incremental
  Client = mark-LD800-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "kristi-Gw-fd"
  Type = Backup
  Level = Incremental
  Client = krists-Gw-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "mark-Inspiron-3537-fd"
  Type = Backup
  Level = Incremental
  Client = mark-Inspiron-3537-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}


Console "Status" / "Scheduled" data for subject Client machines AFTER the above settings were saved and Director restarted:
Differential   Backup    10  Sun 16-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-LD800         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-OP745         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   kristi-Gw          WeeklyCycle

Thank you for your help.

Mark Gregory

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Back-up Schedules not being carried over to console

Laurent ALONSO
In reply to this post by Mark Gregory
Hi
Why 3 Jobdefs, you only need 1.
You can put in your job resource :
Job{
Name = mark-LD800-fd
...
Schedule = "DaytimeWkDay"
...
}

Best regards

http://www.bacula.org/5.2.x-manuals/en/main/main/Configuring_Director.html#SECTION001430000000000000000
The JobDefs Resource

The JobDefs resource permits all the same directives that can appear in a Job resource. However, a JobDefs resource does not create a Job, rather it can be referenced within a Job to provide defaults for that Job. This permits you to concisely define several nearly identical Jobs, each one referencing a JobDefs resource which contains the defaults. Only the changes from the defaults need to be mentioned in each Job.


2017-04-14 12:18 GMT+02:00 Mark Gregory <[hidden email]>:
I am using Linux Cinnamon Mint 18.1, and recently installed / set up Bacula version 7.0.5 using Synaptic.  I have it configured, and have backed up three Client computers in my local network without issues.

I made a new schedule called "DaytimeWkDay" to back up three other computers in my possession at shortly after noon (12:35 PM) that are not running 24 hours a day.  I added the schedules to the subject Client machines in bacula-dir.conf, but the "Status, Scheduled" in console still shows "WeeklyCycle" for these machines.

How do I get the console to run these machines on the DaytimeWkDay schedule?

Below are some relevant settings from bacula-dir.conf:

Client Definitions for subject Client machines:
Client {
  Name = mark-LD800-fd
  Address = 192.168.1.26
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = kristi-Gw-fd
  Address = 192.168.1.101
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = mark-Inspiron-3537-fd
  Address = 192.168.1.25
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}


Schedule Definition:
Schedule {
  Name = "DaytimeWkDay"
  Run = Level=Full Pool=DtFull 1st mon at 12:35
  Run = Level=Differential Pool=DtDiff 2nd-5th mon at 12:35
  Run = Level=Incremental Pool=DtDaily mon-fri at 12:35
}


Job Definitions for the subject Client machines:
JobDefs {
  Name = "mark-LD800"
  Type = Backup
  Level = Incremental
  Client = mark-LD800-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "kristi-Gw-fd"
  Type = Backup
  Level = Incremental
  Client = krists-Gw-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "mark-Inspiron-3537-fd"
  Type = Backup
  Level = Incremental
  Client = mark-Inspiron-3537-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}


Console "Status" / "Scheduled" data for subject Client machines AFTER the above settings were saved and Director restarted:
Differential   Backup    10  Sun 16-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-LD800         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-OP745         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   kristi-Gw          WeeklyCycle

Thank you for your help.

Mark Gregory

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Back-up Schedules not being carried over to console

Ana Emília M. Arruda
Hello Mark,

I suppose you have only one Director/Catalog. You can manage your Director locally or remotely, it doesn't matter, trhough a console (bconsole, etc.).

You didn't send to us your Jobs configuration. If you have another 'Schedule' configured in your Job resources, it will override the one defined in JobDefs resources. Please check your Job resources (mark-LD800, mark-OP745 and kristi-Gw) and remove any schedule directive you have defined if you want to use the one configured in the JobDefs for these jobs.

Best regards,

Ana

On Fri, Apr 14, 2017 at 6:47 PM, Laurent ALONSO <[hidden email]> wrote:
Hi
Why 3 Jobdefs, you only need 1.
You can put in your job resource :
Job{
Name = mark-LD800-fd
...
Schedule = "DaytimeWkDay"
...
}

Best regards

http://www.bacula.org/5.2.x-manuals/en/main/main/Configuring_Director.html#SECTION001430000000000000000
The JobDefs Resource

The JobDefs resource permits all the same directives that can appear in a Job resource. However, a JobDefs resource does not create a Job, rather it can be referenced within a Job to provide defaults for that Job. This permits you to concisely define several nearly identical Jobs, each one referencing a JobDefs resource which contains the defaults. Only the changes from the defaults need to be mentioned in each Job.


2017-04-14 12:18 GMT+02:00 Mark Gregory <[hidden email]>:
I am using Linux Cinnamon Mint 18.1, and recently installed / set up Bacula version 7.0.5 using Synaptic.  I have it configured, and have backed up three Client computers in my local network without issues.

I made a new schedule called "DaytimeWkDay" to back up three other computers in my possession at shortly after noon (12:35 PM) that are not running 24 hours a day.  I added the schedules to the subject Client machines in bacula-dir.conf, but the "Status, Scheduled" in console still shows "WeeklyCycle" for these machines.

How do I get the console to run these machines on the DaytimeWkDay schedule?

Below are some relevant settings from bacula-dir.conf:

Client Definitions for subject Client machines:
Client {
  Name = mark-LD800-fd
  Address = 192.168.1.26
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = kristi-Gw-fd
  Address = 192.168.1.101
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}

Client {
  Name = mark-Inspiron-3537-fd
  Address = 192.168.1.25
  FDPort = 9102
  Catalog = MyCatalog
  Password = "password deleted"
  File Retention = 60 days
  Job Retention = 6 months
  AutoPrune = yes
}


Schedule Definition:
Schedule {
  Name = "DaytimeWkDay"
  Run = Level=Full Pool=DtFull 1st mon at 12:35
  Run = Level=Differential Pool=DtDiff 2nd-5th mon at 12:35
  Run = Level=Incremental Pool=DtDaily mon-fri at 12:35
}


Job Definitions for the subject Client machines:
JobDefs {
  Name = "mark-LD800"
  Type = Backup
  Level = Incremental
  Client = mark-LD800-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "kristi-Gw-fd"
  Type = Backup
  Level = Incremental
  Client = krists-Gw-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}

JobDefs {
  Name = "mark-Inspiron-3537-fd"
  Type = Backup
  Level = Incremental
  Client = mark-Inspiron-3537-fd
  FileSet = "Full Set"
  Schedule = "DaytimeWkDay"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}


Console "Status" / "Scheduled" data for subject Client machines AFTER the above settings were saved and Director restarted:
Differential   Backup    10  Sun 16-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-LD800         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-LD800         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   mark-OP745         WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   mark-OP745         WeeklyCycle
Differential   Backup    10  Sun 16-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 11-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 12-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 13-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Fri 14-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Sat 15-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Mon 17-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Tue 18-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Wed 19-Apr 23:05   kristi-Gw          WeeklyCycle
Incremental    Backup    10  Thu 20-Apr 23:05   kristi-Gw          WeeklyCycle

Thank you for your help.

Mark Gregory

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/bacula-users
Loading...